|
THERMAL EXPANSION
MODEL 1101 conventional vertical fused quartz dilatometer. Single or dual specimens, regular or large size samples. Up to four instruments can be clustered around one computer. Absolute or differential (dual pushrod) types. Operating temperature range -150°C to 1200°C, covered in various segments by different sub-models. Designed for carbon anode testing and large cored samples.
|
|
|
MODEL 1091 conventional horizontal fused quartz dilatometer. Single, dual or quad sample configuration. Temperature range -150°C to 1000°C; covered in segments by various sub-models. Fast cycle IR furnace option.
MODEL 1161 high temperature vertical alumina dilatometer with ambient to 1650°C range. Counter-balanced absolute or differential (dual pushrod) types. Also available for large size samples. Especially suitable for sintering studies. Option for safe operation in reducing atmospheres.
|
 |
 |
MODEL 1252 ultra-high temperature vertical graphite dilatometer system with a RT to 2800°C range with proprietary optical pyrometer temperature sensing. Absolute or differential (dual pushrod) types. Counter-balanced pushrod makes this device very useful in ultra-high temperature sintering studies. Fully computerized system.
WorkHorse ™ Dilatometers are
rugged production devices intended for quality control and limited development
work. Extremely small footprint, stand-alone instrumentation, and a modest price
makes it a good choice for a multitude of applications. RT to 1000°C or
1550°C.
QuickLine ™ -05 manual
horizontal dilatometers from RT to 500°C or 1000°C. Digital temperature
controller and digital displacement transducer. Economical for educational and
quality control labs.
|
|
THERMAL CONDUCTIVITY
MODEL 3141 Transient Hot Wire Method available in several temperature ranges covering RT to 1500°C with single or multiple sample placements. Useful in testing insulators (fire bricks, refractory ceramic fibers, etc.) using Windows™ operating and data analysis software. Conforms to  C-1113.
MODEL 6000 Guarded Hot Plate for
testing of thermal insulations and other materials of low thermal conductivity.
Models cover ranges from -180°C to 550°C. Sample size 300 mm square,
maximum sample thickness 75 mm. Fully computerized system. Conforms to C177
and  8302.
THERMAL DIFFUSIVITY
|
FLASHLINE ™ 3000 is a moderately
priced system for temperatures from -180°C to 1000°C. It uses a high
speed xenon discharge (HSXD) pulse source to test larger, coarse-grained materials
(refractories, carbons, rocks, etc.) and composites. Multiple sample capability
allows specific heat capacity measurement and thermal conductivity determination.
Note: FlashLine systems are protected under U.S. Patent No. 6,375,349.
|
FLASHLINE ™ 5000 series
is a modular laser flash system that can be configured to satisfy the most diverse
requirements from insulators to highly conductive materials. It can be supplied
with one or several different furnaces to cover a temperature range from -180°C
to 2700°C, and to accommodate single or multiple specimens. The state-of-art
high speed electronics and the extensive dedicated software based on the best
available theoretical and practical foundations generated in the past twenty
five years. Highly accurate specific heat capacity measurement and thermal conductivity
determination.
ISO 9001 Certified
REMOTE (ROBOTIC) APPLICATIONS
Special modifications of instruments to operate in hazardous environments (hot cells, glove boxes, etc.)
including suitability for remote maintenance by manipulators.
|
